High current wiring terminal plug-in series wiring terminal: it is formed by plugging and connecting two parts. One part compresses the wire and then plugs it into the other part, which is welded to the PCB board. The mechanical principle of the bottom and the anti vibration design ensure the long-term airtight connection of the product and the service reliability of the finished product. Both ends of the socket can be equipped with matching ears, which can protect the connector to a great extent and prevent the poor arrangement position of the connector. At the same time, this socket design can ensure that the socket can be correctly inserted into the matrix. The socket can also have assembly buckle and locking buckle. The assembly buckle can be more firmly fixed to the PCB board, and the locking buckle can lock the matrix and socket after installation. Various socket designs can be matched with different parent insertion methods, such as horizontal, vertical or inclined printed circuit board. Different methods can be selected according to customer requirements. You can select metric wire gauge or standard wire gauge

The high current wiring terminal is composed of an insulating base, an insulating partition and a wire piece. The insulating base is integrated. The wiring piece is seated on the insulating base and placed in the insulating partition. The wiring piece includes a conductor clamp, a screw, a nut and a support frame. The support frame is U-shaped, the conductor clamp is placed in the support frame, and the nut and screw press the conductor clamp along the long holes on the two U-shaped end faces of the support frame, The conductor clamp is composed of an upper conductor clamp and a conductive sheet. There are multiple rows of bumps on both sides of the surface of the upper conductor clamp, and there are one or two bumps on the bumps. It is characterized in that there are multiple rows of bumps on both sides of the upper surface of the conductive sheet, the bump of the high current wiring terminal forms an arc with the middle of the upper surface, there are one or two bumps on the arc surface, and the bumps and bumps form a sawtooth shape, The middle section of the upper surface of the conductive sheet is a raised platform, the center of the platform is provided with a threaded hole, which is connected with the insulating base through bolts, and a positioning round block is raised at both ends of the lower surface of the conductive sheet and connected with the U-shaped support frame. When the two upper conductor clamps of the high current wiring terminal are placed on both sides of the conductive sheet platform and clamped with the conductive sheet, the conductor clamp on the high current wiring terminal is connected with the convex block of the conductive sheet (stagger and bite each other to clamp the wires

High current terminal and voltage terminal are; there is no difference between the shape of voltage terminal and current terminal, but pay attention to the wiring diagram of this watch when wiring (generally there will be on the cover of the watch) The main difference between the two terminals of the protection panel is that the voltage terminal, also known as the ordinary terminal, generally cannot disconnect itself, the high current terminal can only be disconnected through the connectable terminal, and the high current terminal can usually disconnect itself for test