The reason why I think of the protection of the compression terminal is that the deformation of the terminal of the wiring harness connector often leads to the failure of some functions in the main machine factory, which is a headache for each main machine factory. In terms of the above aspects, we also need to pay attention to the whole wiring harness production link, the protection of the compression terminals need to be continued attention.

After the circuit is pressed, the terminals will go through the turnover process. In the turnover process, there will inevitably be bump and extrusion, resulting in the extrusion deformation of the terminals. At this time, it is necessary to set a protective cup to protect the terminals. The diameter of the protection cup is 30, 40, 50, 70 and 80mm, and the maximum depth is 160mm. We will flexibly choose different types of protection cups according to the actual state.

Some automobile wiring harness's return route size slanting is long, like chassis wiring harness, the longest loop may achieve 6090mm, in the jacket sub-assembly station, easy to appear the situation of the ground, the material frame increases the protection bag, in this way, also can effectively prevent the terminal from the ground, reduced the risk of the terminal being tramped.

The electrical measuring station is the key station to check the wiring harness conduction, and the monitoring and maintenance of the electrical measuring station itself is also very important. The detection module on the electrical measuring platform has anti-skew grille, in this respect, it is bound to effectively prevent the misalignment in the insertion process, causing the deformation of the public terminal to the top.

Wiring harness production process, the terminal protection also is actually a continuous improvement work, careful to terminal incoming, pressure welding, packaging, assembly, inspection and product packaging line and so on each production link, it is because of this, we also will pay attention to on this to improve and to improve on the space is very large, we need to continue to learn and improve.

Of course, as mentioned above, the compression terminal in the protection, the most important, is to avoid the deformation of the terminal, at the same time is to ensure that the compression terminal can be used more effectively, to ensure the safety of the use of compression terminal equipment.